Recycled Rubber Speed Bumps - Side By Side Product Comparison
|
|
Model Number |
Model
Name |
Desc |
Width |
Height |
Per Linear
Ft. W/Out Hardware |
Per Linear
Ft. With Hardware |
Price
Per
Pound |
|
 
|
434-6027 |
Safety
Rider V |
See Desc |
35.5" |
2.1" |
Sold HW Included |
$47.69 |
$2.15 |
Highest Customer Rating |
 
|
434-6025 |
Easy Rider |
See Desc |
12" |
2.25" |
$24.33 |
$25.83 |
$3.04 |
Best Seller |
 
|
434-6026 |
Alley Bump |
See Desc |
12" |
3.0" |
$35.33 |
$36.83 |
$2.83 |
Most
Effective |
 
|
400-1030 |
Economy
Speed
Bump I |
See Desc |
15" |
2.0" |
$19.38 |
$24.62 |
$1.66 |
Good Value |
 
|
400-1032 |
Economy
Speed
Bump II |
See Desc |
14" |
2.0" |
$19.38 |
$24.62 |
$1.80 |
Good Value |
 
|
400-1036 |
Economy
Speed
Hump I |
See Desc |
23.5" |
1.25" |
$35.03 |
$40.22 |
$2.70 |
|
 
|
400-1038 |
Economy
Speed
Hump II |
See Desc |
36" |
2.0" |
$55.38 |
$62.77 |
$1.91 |
|
The Safety Rider V is an economical solution designed to slow traffic to 10-15 mph (this is only an approximation) while maintaining a continuous traffic flow. Made from vulcanized rubber, the module units can be combined to cover the width of any roadway. Yellow reflective tape is included not only on each middle section, but also on the end caps for added visibility.
The molded rubber pattern provides an anti-skid surface to help prevent vehicles and pedestrians from slipping. Ready to pick-up and install, the Safety Rider V is a durable solution for any location where slow traffic is required.
Manufactured from 100% recycled rubber tires. Superior construction ensures that this speed bump will not warp, crack, or chip. Easy handling and storage. Easily installed by one person. Resistant to ultraviolet light, moisture, oil, and extreme temperature variations. Flexible design allows conformity to the contour of virtually any road surface. Maintenance free. Contributes to a safer environment. Visible, rebarless construction lowers insurance premiums. Ideal for indoor and outdoor parking areas.
-
Designed to slow cars down to 5 MPH
-
Weight limit per axle: 10,500lbs
-
Resistant to warping, cracking, chipping and rotting
-
Flexible and capable of conforming to irregularities in paving surface
-
Finish: black body with yellow reflective parallelogram stripes (not painted on but molded from highway tape into rubber)
-
"Cat eye" reflectors imbedded for additional reflectivity
-
Channels at the bottom of 1.25” x 1.25” for drainage, piping and cabling
Alley bumps were developed specifically to address speeding and cut-through traffic in city alleyways, slowing cars to 1-5 mph (this is only an approximation). Constructed from 100% recycled tires, the flexible design conforms to the contour of virtually any road surface. Pre-drilled holes for anchoring spikes or lag bolts, alley bumps are simple to install and can be easily removed for storage or relocation. The bumps are available in 4’-30’ lengths. End caps may be purchased to protect the alley bump ends and vehicles. The channeled bottom helps facilitate drainage as well as cover cabling or piping. They are designed to withstand extreme weather and stress, and are resistant to moisture, oil, temperature variations, and ultraviolet light. They will not warp, crack, chip, or rot, and are covered by a 3 year warranty on the product and a 1 year warranty on the tape (under normal usage).
Our Recycled Rubber 2-Section Speed Bump will reduce speeds down to 5-10 MPH. Speed bumps slow traffic effectively without tire or vehicle damage and are ideal for any location where traffic calming is necessary.
Benefits:
-
Speed bumps are uniformly made
-
Can be installed by a single person
-
Light weight and flexible
-
Maximum visibility
-
Do not require repainting
-
Installed with light tools
-
Easily movable and removable
-
Temporary or permanent installation on concrete or asphalt
-
Do not chip, break or crack
-
Long wearing
-
Made from 100% recycled tire
-
Environmentally friendly
-
Promotes recycling awareness
-
2 year warranty against defect
-
Custom configurations to your needs
Reduce speeds down to 5-10 MPH. Speed bumps slow traffic effectively without tire or vehicle damage and are ideal for any location where traffic calming is necessary.
Benefits:
-
Speed bumps are uniformly made
-
Can be installed by a single person
-
Light weight and flexible
-
Maximum visibility
-
Do not require repainting
-
Installed with light tools
-
Easily movable and removable
-
Temporary or permanent installation on concrete or asphalt
-
Do not chip, break or crack
-
Long wearing
-
Made from 100% recycled tire
-
Environmentally friendly
-
Promotes recycling awareness
-
2 year warranty against defect
-
Custom configurations to your needs
Reduce speeds down to 5-10 MPH. Speed bumps slow traffic effectively without tire or vehicle damage and are ideal for any location where traffic calming is necessary.
Benefits:
-
Speed bumps are uniformly made
-
Can be installed by a single person
-
Light weight and flexible
-
Maximum visibility
-
Do not require repainting
-
Installed with light tools
-
Easily movable and removable
-
Temporary or permanent installation on concrete or asphalt
-
Do not chip, break or crack
-
Long wearing
-
Made from 100% recycled tire
-
Environmentally friendly
-
Promotes recycling awareness
-
2 year warranty against defect
-
Custom configurations to your needs
Reduce speeds down to 10-15 MPH. Speed humps slow traffic effectively without tire or vehicle damage and are ideal for any location where traffic calming is necessary.
Benefits:
-
Speed humps are uniformly made
-
Can be installed by a single person
-
Light weight and flexible
-
Maximum visibility
-
Do not require repainting
-
Installed with light tools
-
Easily movable and removable
-
Temporary or permanent installation on concrete or asphalt
-
Do not chip, break or crack
-
Long wearing
-
Made from 100% recycled tire
-
Environmentally friendly
-
Promotes recycling awareness
-
2 year warranty against defect
-
Custom configurations to your needs
Reduce speeds down to 10-15 MPH. Speed humps slow traffic effectively without tire or vehicle damage and are ideal for any location where traffic calming is necessary.
Benefits:
-
Speed humps are uniformly made
-
Can be installed by a single person
-
Light weight and flexible
-
Maximum visibility
-
Do not require repainting
-
Installed with light tools
-
Easily movable and removable
-
Temporary or permanent installation on concrete or asphalt
-
Do not chip, break or crack
-
Long wearing
-
Made from 100% recycled tire
-
Environmentally friendly
-
Promotes recycling awareness
-
2 year warranty against defect
-
Custom configurations to your needs
Highland Products has prepared a comparative analysis of vaue and cost of different speed bump solutions for your benefit. Our goal is to make it easy to compare and shop online for speed bumps, however, if you are in need of further assistance, our courteous and professional sales staff is standing by to help.
|
Product Attributes |
Recycled Rubber |
Recycled Plastic |
Asphalt |
|
Ease of Installation |
Easiest |
Medium |
Most Difficult |
|
Contour to Uneven Surfaces |
Highest |
Medium |
Highest |
|
Reflective Material/Night Visibility |
Medium/High |
Medium |
Low/Medium |
|
Brittleness |
Least |
Least |
Most |
|
Made from Recycled Material |
Yes |
Yes |
No |
|
Is Product Recyclable at End of Life |
Yes |
Yes |
No |
|
LEED Qualified |
Yes |
Yes |
No |
|
Installation Costs |
Low |
Low |
High |
|
Portable/Relocatable |
Yes |
Yes |
No |
|
Traffic Calming Effectiveness |
High |
Low |
High
|
|
Lead Times |
Short |
Short |
Medium/Long |
Choosing a Recycled Rubber Speed Bump:
When choosing a speed bump from our recycled rubber line you must take into consideration length, width and height.
When determining length, please consider that rubber speed bumps are sold in sections and many are sold with contoured end caps.
Total length = (Number of sections * Section Width) + (Number of End Caps * End Cap Width)
For example,
Easy Rider Speed Bumps are sold in 4 foot and 6 foot sections, and End Caps are sold as a pair with a total width of 18".