10-Ft. Specialty Wood Picnic Table - 14-Gauge Galvanized Metal Frame,PRE-DRILLED
#1 kiln-dried Southern Yellow Pine table top and seats with 1-piece welded galvanized metal end frame. Available in longer lengths for use in a shelter building or wherever an extra-long table is desired. Convenient "walk-in" design with nothing to step over. Seats are attached so there’s no tipping over when only one side is being used. Tables slide easily for mowing and maintenance. The legs don’t stand out behind the seats for people to tip over.
Wood is precision cut and the saw cuts are rounded off. Five 2x10 pine planks (3 for the top and 1 for each seat). Planks are pre-drilled.
The frame is hot-dipped galvanized 14-gauge 1½" OD steel tubing. Top and seat supports are 1½"x1½"x3/16" steel angles. A unique center channel ties in the three-board top to resist warpage, resulting in a flatter, stronger tabletop. The braces from the end frames attach to the center channel for added strength.
By adding extra frames, braces, and center channels, a table can be built to whatever length meets the particular situation.
Self-tapping lag screws are standard. Carriage bolts are optional. All fasteners are galvanized.
Dimensions: 59" width, 27" top height, 17" seat height.
Please note: This items is made from natural, unfinished lumber. While it is commercial grade, it is not furniture grade and therefore may contain cosmetic imperfections such as knots. You may add stains or varnishes to improve the look of your wood once it arrives.
PLEASE NOTE: lumber may require sanding due to splintering while in transit.