23L Oak Capitol Chair Bench
Actual product may vary from image shown.
Please contact an expert for more info: 866-280-9894
Please contact an expert for more info: 866-280-9894
23L Oak Capitol Chair Bench
$465.00
save
%
23L Oak Capitol Chair Bench
Frame is made of cast aluminum poured in permanent molds with electrostatic powder coating with plating of antique brass or antique copper (not for exterior use).
Rails are made of FAS white oak, 2.5” wide by 0.75” milled two edges 0.75” half round with all railings has duckback superdeck finish.
For fastening, 20 steel zinc plate, yellow-dipped 0.25” carriage bolt with 0.25” steel zinc plate nuts are provided. Seat height is 16”, seat depth is 25”.
Frame is made of cast aluminum poured in permanent molds with electrostatic powder coating with plating of antique brass or antique copper (not for exterior use).
Rails are made of FAS white oak, 2.5” wide by 0.75” milled two edges 0.75” half round with all railings has duckback superdeck finish.
For fastening, 20 steel zinc plate, yellow-dipped 0.25” carriage bolt with 0.25” steel zinc plate nuts are provided. Seat height is 16”, seat depth is 25”.
Estimate Freight
Estimate Freight
Description
23L Oak Capitol Chair Bench
Frame is made of cast aluminum poured in permanent molds with electrostatic powder coating with plating of antique brass or antique copper (not for exterior use).
Rails are made of FAS white oak, 2.5” wide by 0.75” milled two edges 0.75” half round with all railings has duckback superdeck finish.
For fastening, 20 steel zinc plate, yellow-dipped 0.25” carriage bolt with 0.25” steel zinc plate nuts are provided. Seat height is 16”, seat depth is 25”.
Frame is made of cast aluminum poured in permanent molds with electrostatic powder coating with plating of antique brass or antique copper (not for exterior use).
Rails are made of FAS white oak, 2.5” wide by 0.75” milled two edges 0.75” half round with all railings has duckback superdeck finish.
For fastening, 20 steel zinc plate, yellow-dipped 0.25” carriage bolt with 0.25” steel zinc plate nuts are provided. Seat height is 16”, seat depth is 25”.
