Skate Deterrent for Walls with 1" Radius Edge
Actual product may vary from image shown.
Please contact an expert for more info: 866-280-9894
Please contact an expert for more info: 866-280-9894
Skate Deterrent for Walls with 1" Radius Edge
$471.00
save
%
Skate Deterrent for Walls with 1" Radius Edge
This patent pending part is designed for walls with a 1" radius edge. This is commonly used on 2" bullnose brick and poured concrete with a 1" radius edge. Comes in clear anodized finish.
Each kit includes parts, anchors, adhesive, mixing nozzles, and a warning sign.
Outside dimensions are 4.375" (top) x 1.625" (face) x 2" (wide).
Recommended spacing is 24" to 36" apart.
Mounting hardware options are adhesive and spiral drive, adhesive and smart pins, threadlocker and carriage assembly.
This patent pending part is designed for walls with a 1" radius edge. This is commonly used on 2" bullnose brick and poured concrete with a 1" radius edge. Comes in clear anodized finish.
Each kit includes parts, anchors, adhesive, mixing nozzles, and a warning sign.
Outside dimensions are 4.375" (top) x 1.625" (face) x 2" (wide).
Recommended spacing is 24" to 36" apart.
Mounting hardware options are adhesive and spiral drive, adhesive and smart pins, threadlocker and carriage assembly.
*PRODUCT DISCLAIMER*
This Product is not to be installed on any pedestrian traffic surface. Parts may create a trip hazard that can result in serious injury or death.
Estimate Freight
Estimate Freight
Description
Skate Deterrent for Walls with 1" Radius Edge
This patent pending part is designed for walls with a 1" radius edge. This is commonly used on 2" bullnose brick and poured concrete with a 1" radius edge. Comes in clear anodized finish.
Each kit includes parts, anchors, adhesive, mixing nozzles, and a warning sign.
Outside dimensions are 4.375" (top) x 1.625" (face) x 2" (wide).
Recommended spacing is 24" to 36" apart.
Mounting hardware options are adhesive and spiral drive, adhesive and smart pins, threadlocker and carriage assembly.
This patent pending part is designed for walls with a 1" radius edge. This is commonly used on 2" bullnose brick and poured concrete with a 1" radius edge. Comes in clear anodized finish.
Each kit includes parts, anchors, adhesive, mixing nozzles, and a warning sign.
Outside dimensions are 4.375" (top) x 1.625" (face) x 2" (wide).
Recommended spacing is 24" to 36" apart.
Mounting hardware options are adhesive and spiral drive, adhesive and smart pins, threadlocker and carriage assembly.
*PRODUCT DISCLAIMER*
This Product is not to be installed on any pedestrian traffic surface. Parts may create a trip hazard that can result in serious injury or death.