Skate Stopping Clip for 3/4" Chamfered Edge
Actual product may vary from image shown.
Please contact an expert for more info: 866-280-9894
Please contact an expert for more info: 866-280-9894
Skate Stopping Clip for 3/4" Chamfered Edge
$471.00
save
%
45-Degree Skate Stopping Clip for Chamfered Edge Walls
This patented part is designed for chamfered edge walls (walls with a 45 degree cut-off the corner). It is most commonly used on poured concrete, but it may be used on granite, marble, or pre-cast concrete. Comes in clear anodized finish.
Each kit includes parts, anchors, adhesive, mixing nozzles, and a warning sign.
Outside dimensions are 3.75" (top) x 1.0" (face) x 2.0" (wide).
Recommended spacing is 24" to 36" apart.
Mounting hardware is the smart pin. The patented SmartPin™ design eliminates the need to tap the rail.
This patented part is designed for chamfered edge walls (walls with a 45 degree cut-off the corner). It is most commonly used on poured concrete, but it may be used on granite, marble, or pre-cast concrete. Comes in clear anodized finish.
Each kit includes parts, anchors, adhesive, mixing nozzles, and a warning sign.
Outside dimensions are 3.75" (top) x 1.0" (face) x 2.0" (wide).
Recommended spacing is 24" to 36" apart.
Mounting hardware is the smart pin. The patented SmartPin™ design eliminates the need to tap the rail.
*PRODUCT DISCLAIMER*
This Product is not to be installed on any pedestrian traffic surface. Parts may create a trip hazard that can result in serious injury or death.
Estimate Freight
Estimate Freight
Description
45-Degree Skate Stopping Clip for Chamfered Edge Walls
This patented part is designed for chamfered edge walls (walls with a 45 degree cut-off the corner). It is most commonly used on poured concrete, but it may be used on granite, marble, or pre-cast concrete. Comes in clear anodized finish.
Each kit includes parts, anchors, adhesive, mixing nozzles, and a warning sign.
Outside dimensions are 3.75" (top) x 1.0" (face) x 2.0" (wide).
Recommended spacing is 24" to 36" apart.
Mounting hardware is the smart pin. The patented SmartPin™ design eliminates the need to tap the rail.
This patented part is designed for chamfered edge walls (walls with a 45 degree cut-off the corner). It is most commonly used on poured concrete, but it may be used on granite, marble, or pre-cast concrete. Comes in clear anodized finish.
Each kit includes parts, anchors, adhesive, mixing nozzles, and a warning sign.
Outside dimensions are 3.75" (top) x 1.0" (face) x 2.0" (wide).
Recommended spacing is 24" to 36" apart.
Mounting hardware is the smart pin. The patented SmartPin™ design eliminates the need to tap the rail.
*PRODUCT DISCLAIMER*
This Product is not to be installed on any pedestrian traffic surface. Parts may create a trip hazard that can result in serious injury or death.